Website Position: CCTV products: 16 Channel Power-Video-PTZ PVD 16Channel Power Video BALUN Transceiver

UST116PVD-S Front - Rear Left Side Picture
UST116PVD-S Front - Rear Right Side Picture
UST116PVD-R - Rear Picture -Mounting Reak
UST116PVD-R Front Panel Picture - Mounting Rack


UST116PVD-S Power Video Data Balun Transceiver Hub
UST116PV-S Power - Video Balun Transceiver Hub


16 Channel Power Video PTZ Data (PVD) BALUN Transceiver Hub - Mounting Rack

Stand Alone - Big Size Breakout Screw Terminal Block for Power-Video-Data UTP Cable Solid Reliability Connection
Dual Programmable Power Supplies Selection, AC/DC or Hi/Low Voltage Flexibility for Each 8 Channel

'HUM-BARs' Rejection Power Video Data/PTZ (PVD) BALUN Transceiver -16 Cameras Solution
Automatic-Reset Power Fault Protection; Power-Video-Data Transient Protection
Common Mode Choke, Power Noise Rejection, Low Line EMI Emissions

 

UST116PVD-R Power Video Data Balun Transceiver
UST116PV-R Power - Video Balun Transceiver


16 Channel Power Video PTZ Data (PVD) BALUN Transceiver Hub - Mounting Rack

Shielded RJ45 Jack for Power-Video-Data UTP Cable Compact Connection, Compatible with PVD-PV-Video Baluns
Dual Programmable Power Supplies Selection, AC/DC or Hi/Low Voltage Flexibility for Each 8 Channel

'HUM-BARs' Rejection Power Video Data/PTZ (PVD) BALUN Transceiver -16 Cameras Solution
Automatic-Reset Power Fault Protection; Power-Video-Data Transient Protection
Common Mode Choke, Power Noise Rejection, Low Line EMI Emissions


 

PV/PVD Cable Hub/Integrator Operation Manual Download
PV Cable Hub/Integrator Operation Manual Download
PV/PVD Balun Transceiver Operation Manual Download
 


Description


16 CH CCTV Video Balun with Power Data Hub allows 4X4 base-band composite video signals, power supplies as well Data to be transmitted via unshielded twisted pair (UTP) cable for more versatile cabling.

The 16 CH PVD Hub can be used with CCTV power & data thru balun or CCTV Power converter for wide applications, and allow you to eliminate more expensive coaxial cables, including coupling signals from remote video cameras to display systems, video capture, security and surveillance monitoring applications.

UST116PV-S and UST116PVD-S are Power Video (PV) and Power Video Data (PVD) Balun Transceivers, which are using Elinx's stand alone Solid Link TM Technology by large size screw terminal block connection, and dual channel programmable power supplies selection for different engineering cases like IR camera (12VDC to 18VDC) DC power and high speed dome (18V/24V/28V/36VAC) AC power in CCTV mixed power application as we called flexible and mixed power supply versatile Power-Video-PTZ Data (PVD) Transceiver.

Of cause, the UST116PVD-S and UST116PV-S can be set as conventional single power supply (parallel two power jack connection) for up to maximum 12A with each port maximum 1.1A current limit with automatic-reset fault protection.

UST116PV-R and UST116PVD-R models use shield RJ45 jack for compact connection, all other specifications are the same as UST116PV-S and UST116PVD-S models. The RJ45 jack lines alignment is compatible with single channel UST102PV-MR/FR Power Video (PV) Tx, UST103PVD-M/F Power Video Data (PVD) Rx and UST102RJ Video Balun Tx products.



Specification


Environment:
CCTV equipment for security and surveillance video, data, and power transmission.
Devices: CCTV cameras, monitors, multiplexers, digital video recorders (DVR) and other CCTV equipment.
Bandwidth: Video DC to 8MHz
Maximum input: 1.0Vp-p
Insertion loss: Max. 1.2dB per pair over the frequency range from DC to 8MHz
Return loss: Greater than 18dB over the frequency range from DC to 8MHz
Cross Talk: Greater than 58dB over the frequency range from DC to 8MHz
Common mode rejection: Greater than 40dB at 8MHz
Maximum video distance: Color: Cat.5 2230ft (680 Meter), Monochrome: Cat.5 2550ft (780 Meter), No qualified cable might decrease the transmission distance.
Maximum power distance: Max. Distance @ 24Vac via UTP Cat5 cable (24 AWG):
5VA .......... 558ft (170m) 10VA ........... 279ft (85m) 20VA .............. 141ft (43m) 30VA ................. 92ft (28m)
Data: PTZ by RS485. It can be transmitted up to 1000m over cat.5 UTP cable
Cable-UTP: Cat 5 or better, 24 gauge typical, Max. capacitance :20pf/ft, Attenuation: 6.6dB/1000ft at 1MHz
Cable-Coax: Impedance: 75 ohm at 1MHz, Max. 25ft. of coax allowed per end to end link
Connectors: Screw Terminal Block, BNC Male, DC jack and a two pins of Data terminal block, one pin for GND connection.
Polarities of each channel:

Video 1+/2-, Power thru 3+/4-, Data thru 5+/6- for Breakout Screw Terminal Block connector

Video 8+/7-, Power thru 1,3+/2,6-, Data thru 4+/5- (RJ45 Jack for UST116PVD-R UST116PV-R OEM/ODM)
8 channels share the same Power and Data inputs


Impedance: 75 ohm to 100 ohm (or 75ohm to 120ohm on request)
Power Supply: 12VDC to 48VDC /6A, 18V to 36V AC /6A for each power jack
Power Backup: Centralized power management through UPS at monitorásite, no worry for power blackout.
Temperature: Operating temp. 0 to 55░ C, Storage temp. -22 to 85░C, Humidity up to 95%
Dimension: 1U,19" Rack
Weight: 2.2kg - UST116PVD-S/UST116PV-S UST116PVD-R/UST116PV-R


Application Diagram


 
 
 


COPYRIGHT© Elinx Technology Co.,Ltd.    mail:elinxsz@126.com unionst@126.com
Company Add.:14Fl., 10Bld., No. 3101, Qianhai Rd. Nanshan Dis., Shenzhen, China
Tel: +86 755 26442005 26442235 Mobile: +86 13530886175 13715398087