Website Position: CCTV products: 1 Channel Passive Video Transceiver with Power


Mini Cable with BNC-M and Power Male Connectors

Breakout Screw Terminal Connectors for Power and Video

Video Balun with 24VAC/36VAC or 24VDC/60VDC Input to 12VDC-1A Output Regulated Power
Mounting Holes and Power LED Indicator

Model Number:


Model Number: UST102PV-MA UST102PV-FA
Model Number: UST102PV-M UST102PV-F


1 Channel Passive Video Transceiver with Power

'HUM-BARs' Rejective Passive Video POE Transceiver with 120mm Cable
Common Mode Choke, POE Line Noise Rejection, Low Line EMI Emissions
(UST102PV-FA UST102PV-MA, 'A' model has strippable screw for mounting tabs)

Big screw terminal for CAT5 cable, solid connection than unsolidified RJ45 Jack
Direct screw terminal connection via complex CAT5 cable to RJ45 connector building


Operation Manual Download


  • Big breakout terminal screw for CAT5 cable, solid connection than unsolidified RJ45 Jack
  • Direct screw connection instead of complex CAT5 cable to RJ45 connector building
    (UST102PV-FA UST102PV-MA, 'A' model has strippable screw for installable hole)
  • Video and power transmission via one UTP CAT5 cable.
  • Over 10-20% wire costs saved.
  • Full-motion CCTV video at distances up to 2000ft B/W(600m), 1500ft Color (400m)
  • Building video and power filter and loop termination circuit
  • 'HUM-BARs' rejective video POE BALUN transceiver
  • Outstanding interference rejection and transient surge protection.
  • Building in lightning protection gas tuber for both video and power/POE channels
  • Common mode coil choke for power- POE line noise rejection, low power noise emissions
  • Male BNC with 120mm coaxial cable allows connection directly to the camera or DVR.
  • Male and Female power connector with 120mm cable allows POE transmission.
  • 12V to 48VDC/ACpower from UST102PV-M, and output from UST102PV-F.
  • Up to 3,000ft (1km) with active receiver or hub.
  • For more information, please contact with authorized distributors.


DC to 6 Mhz: 1.5 dB max

Common-mode rejection
Video:15KHz to 5 Mhz: 60 dB typ
Power:10KHz to 100Khz: 60 dB typ

Return loss rjection
Video: Over 18dB @1Mhz

Coax Cable, Male BNC75 ohms
UTP, Screw Terminals 100 ohms

Wire Type
Network Wiring: One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) per signal
Category Type: Cat 2 or better
Impedance: 100 20 ohms
DC Loop Resistance: 26 ohms max
Differential Capacitance: 19 pF/ft max
Wire Length: Camera to monitor including coax, 1,000 ft (300m) , up to 2000ft max (600m) B/W signal

Connector Interfaces
Video: Male BNC connector with 120mm coxial cable
Power: Male/Female power connectors with 120mm cable (UST102PV-M UST102PV-F)
Network Interface: 2 screw terminals for one UTP pair video and 2 screw terminals for 3 UTP pair power cables

Temperature: 0 to +50C
Humidity (non-condensing): 0 to 95%
ESD Susceptibility (200 pf probe) : 20 KV

Dimensions: 85*38*22mm with 120mm coxial and power female/male cable
Weight: 90g
Material: Black ABS
Mounting: No needed
Package: Paper Box

Application Diagram


COPYRIGHT© Elinx Technology Co.,Ltd.
Company Add.:14Fl., 10Bld., No. 3101, Qianhai Rd. Nanshan Dis., Shenzhen, China
Tel: +86 755 26442005 26442235 Mobile: +86 13530886175 13715398087